مضخة قياس الحجاب الحاجز الهيدروليكية Hydro/ 3 API 675
Price: 1$
للحصول على معلومات دقيقة واستفسار عن الأسعار، يرجى الاتصال بنا. نحن سعداء بالإجابة على أسئلتكم وتلبية احتياجاتكم.
سوف نقوم بالرد عليك في أقرب وقت ممكن.
Available on backorder
مضخة قياس الحجاب الحاجز الهيدروليكية HYDRO API
نطاق سعة المضخة ذات الرأس الواحد: 7 – 1,506 لتر/ساعة، 100 – 7 بار
تعتبر HYDRO API 675 مضخة قياس الحجاب الحاجز الهيدروليكية شديدة القوة، والتي تلبي متطلبات السلامة الأكثر دقة ومصممة وفقًا لـ API 675. ويضمن ذلك الحجاب الحاجز متعدد الطبقات المصنوع من مادة PTFE مع مراقبة الحجاب الحاجز، والدفع الكامل الحركة والنزف التلقائي، على سبيل المثال. كما أن هيكلها المعياري يجعلها متعددة الاستخدامات للغاية.
Technical Details
- Stroke length: 15 mm (HA1a, HA2a, HA3a), 20 mm (HA4a)
- Rod force: 2000 N (HA1a, HA2a), 4200 N (HA3a), 5800 N (HA4a)
- Stroke volume adjustment range: 0 – 100%
- Stroke volume adjustment: manually using scaled rotary dial (with electric actuator or control drive as an option).
- Metering reproducibility is better than ± 1% in the 10 – 100% stroke volume range under defined conditions and with correct installation
- PTFE multi-layer diaphragm with electrical diaphragm monitoring with condition signals sent via contact
- Integrated hydraulic relief and bleed valve
- Full-motion drive
- Wetted materials: PVDF, PTFE+25% carbon, stainless steel 1.4571, Hastelloy C.
- A wide range of drive versions is available: Three-phase or standard three-phase motors or motors for use in areas at risk from explosion, different flange designs for use of customer-specific motors
- Degree of protection: IP 55
- Design in compliance with API 675
Hydraulic Diaphragm Metering Pump HYDRO HA1a
Technical data for HYDRO HA1a (50 Hz)
| Plunger Ø | Max. pressure | Max. pump capacity in l/h at strokes/min | Theor. stroke volume | Suction lift | Connection on suction/discharge side | Shipping weight | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 60 | 125 | 150 | 187 | 214 | ||||||
| mm | bar | l/h | l/h | l/h | l/h | l/h | ml/stroke | m WC | G-DN | kg |
| * Double ball valve with female thread | ||||||||||
| 9 | 100 | [0.8] | [1.5] | [1.9] | [2.5] | [3.0] | 0.9 | 3.0 | NPT 1/4 – DN 3 * | 31 |
| 9 | 64 | (1.3) – 1.3 | (2.9) – 2.9 | (3.1) – 3.1 | (4.0) – 4.8 | (4.8) – 5.3 | 0.9 | 3.0 | NPT 1/4 – DN 3 * | 31 |
| 9 | 40 | (1.7) – 1.8 | (2.7) – 3.9 | (3.6) – 4.7 | (4.0) – 6.0 | (5.5) – 6.8 | 0.9 | 3.0 | NPT 1/4 – DN 3 * | 31 |
| 9 | 25 | (1.7) – 2.1 | (2.8) – 4.5 | (3.8) – 5.6 | (4.6) – 7.0 | (5.5) – 8.0 | 0.9 | 3.0 | NPT 1/4 – DN 3 * | 31 |
| 9 | 10 | (1.7) – 2.5 | (2.8) – 5.2 | (3.8) – 6.3 | (4.6) – 7.8 | (5.5) – 9.1 | 0.9 | 3.0 | NPT 1/4 – DN 3 * | 31 |
| 12 | 100 | (2.9) – 2.9 | (5.5) – 6.0 | (7.4) – 7.4 | (8.0) – 9.3 | (9.0) – 10.1 | 1.7 | 3.0 | NPT 1/4 – DN 6 * | 31 |
| 12 | 64 | (2.8) – 3.6 | (4.5) – 7.7 | (7.0) – 9.1 | (8.0) – 11.4 | (9.0) – 13.0 | 1.7 | 3.0 | NPT 1/4 – DN 6 * | 31 |
| 12 | 40 | (2.5) – 4.1 | (4.5) – 8.7 | (6.0) – 10.4 | (7.0) – 13.0 | (9.0) – 14.7 | 1.7 | 3.0 | NPT 1/4 – DN 6 * | 31 |
| 12 | 25 | (2.3) – 4.5 | (4.8) – 9.4 | (6.0) – 11.1 | (7.0) – 13.8 | (9.0) – 15.9 | 1.7 | 3.0 | NPT 1/4 – DN 6 * | 31 |
| 12 | 10 | (2.5) – 4.8 | (4.8) – 10.1 | (6.0) – 12.1 | (7.0) – 15.1 | (9.0) – 17.1 | 1.7 | 3.0 | NPT 1/4 – DN 6 * | 31 |
Technical data for HYDRO HA1a (60 Hz)
| Plunger Ø | Max. pressure | Max. pump capacity in l/h at strokes/min | Theor. stroke volume | Suction lift | Connection on suction/discharge side | Shipping weight | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 72 | 149 | 180 | 224 | ||||||
| mm | bar | l/h | l/h | l/h | l/h | l/h | ml/stroke | m WC | G-DN | kg |
| * Double ball valve with female thread | ||||||||||
| 9 | 100 | [0.5] | [0.8] | [1.8] | [2.0] | [3.0] | 0.9 | 3.0 | NPT 1/4 – DN 3 * | 31 |
| 9 | 64 | [1.2] | (1.6) – 1.6 | (3.3) – 3.3 | (3.7) – 3.7 | (4.8) – 5.7 | 0.9 | 3.0 | NPT 1/4 – DN 3 * | 31 |
| 9 | 40 | (1.7) – 1.7 | (2.0) – 2.1 | (3.2) – 4.6 | (4.3) – 5.6 | (4.8) – 7.2 | 0.9 | 3.0 | NPT 1/4 – DN 3 * | 31 |
| 9 | 25 | (2.0) – 2.1 | (2.0) – 2.5 | (3.4) – 5.4 | (4.5) – 6.7 | (5.5) – 8.4 | 0.9 | 3.0 | NPT 1/4 – DN 3 * | 31 |
| 9 | 10 | (2.0) – 2.5 | (2.0) – 3.0 | (3.4) – 6.2 | (4.5) – 7.5 | (5.5) – 9.3 | 0.9 | 3.0 | NPT 1/4 – DN 3 * | 31 |
| 12 | 100 | (2.8) – 2.8 | (3.5) – 3.5 | (6.6) – 7.2 | (8.8) – 8.8 | (9.6) – 11.1 | 1.7 | 3.0 | NPT 1/4 – DN 6 * | 31 |
| 12 | 64 | (2.4) – 3.6 | (3.4) – 4.3 | (5.4) – 9.2 | (8.4) – 10.9 | (9.6) – 13.6 | 1.7 | 3.0 | NPT 1/4 – DN 6 * | 31 |
| 12 | 40 | (2.6) – 4.0 | (3.0) – 4.9 | (5.4) – 10.4 | (7.2) – 12.4 | (8.4) – 15.6 | 1.7 | 3.0 | NPT 1/4 – DN 6 * | 31 |
| 12 | 25 | (2.6) – 4.4 | (3.0) – 5.4 | (5.7) – 11.2 | (7.2) – 13.3 | (8.4) – 16.5 | 1.7 | 3.0 | NPT 1/4 – DN 6 * | 31 |
| 12 | 10 | (2.6) – 4.4 | (3.0) – 5.7 | (5.7) – 12.1 | (7.2) – 14.5 | (8.4) – 18.1 | 1.7 | 3.0 | NPT 1/4 – DN 6 * | 31 |
Piston Ø 9 and 12, version with double ball valves.
The permitted rated flow configuration is possible in the stated range when pumps are selected in accordance with API 675 (control range 1:10).
The litre capacity indicated using […] is the maximum litre capacity with an applicable control range of 1:5 and does not therefore satisfy API 675.
Example: a 12 mm piston, 40 bar pressure and stroke rate of 125 strokes/min results in (4.5) – 8.7, i.e. the control range of 1:10 is met for a rated flow of between 4.5 l/h and 8.7 l/h.
Wetted materials for HYDRO HA1a
| Identity code of material | Dosing head | Suction/discharge connection | Seals/ball seat | Balls |
|---|---|---|---|---|
| S1 | Stainless steel 1.4571/1.4404 | Stainless steel 1.4581 | PTFE/stainless steel 1.4404 | Ceramic |
Motor data for HYDRO HA1a
| Identity code specification | Power supply | Remarks | |||
| S | 3-phase, IP 55* | 230 V/400 V | 50 Hz | 0.37 kW | |
| T | 3-phase, IP 55* | 230 V/400 V 265 V/460 V | 50 Hz 60 Hz | 0.37 kW | With PTC, speed control range 1:5 |
| R | 3-phase, IP 55* | 230 V/400 V | 50 Hz | 0.37 kW | With PTC, speed control range 1:20, with external fan 1-phase 230 V; 50/60 Hz |
| V | 1-phase, IP 55* | 230 V | 50 Hz | 0.37 kW | Variable speed stroke control motor with integrated frequency converter |
| L | 3-phase, II 2G Ex de IIC T4 Gb | 230 V/400 V | 50 Hz | 0.37 kW | With PTC, speed control range 1:5 |
| Q | 3-phase, II 2G Ex de IIC T4 | 265 V/460 V | 60 Hz | 0.37 kW | With PTC, speed control range 1:5 |
* Three-phase motor according to IEC 60034-1Motor data sheets can be requested for more information. Versions 265/460V – 60Hz, special motors or special motor flanges are available on request.
Information for use in areas at risk from explosion
Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EC in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label correspond to or are superior to the conditions prevalent in the intended application.
Hydraulic Diaphragm Metering Pump HYDRO HA2a
Technical data for HYDRO HA2a 50 Hz
| Plunger Ø | Max. pressure | Max. pump capacity in l/h at strokes/min | Theor. stroke volume | Suction lift | Connection on suction/discharge side | Shipping weight | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 60 | 125 | 150 | 187 | 214 | ||||||
| mm | bar | l/h | l/h | l/h | l/h | l/h | ml/stroke | m WC | G-DN | kg |
| * Double ball valve with female thread | ||||||||||
| 16 | 100 | [3.0] | [6.5] | (8.5) – 8.5 | (10) – 11 | (12) – 13 | 3.0 | 3.0 | Rp 1/4 – DN 6 * | 31 |
| 16 | 64 | [4.0] | (10) – 10 | (10) – 13 | (12) – 16.5 | (14) – 18.5 | 3.0 | 3.0 | Rp 1/4 – DN 6 * | 31 |
| 16 | 40 | [5.5] | (10) – 13 | (12) – 15.5 | (14) – 19.5 | (16) – 23.5 | 3.0 | 3.0 | Rp 1/4 – DN 6 * | 31 |
| 16 | 25 | [6.5] | (12) – 14.5 | (14) – 17.5 | (17) – 22.5 | (20) – 26.5 | 3.0 | 3.0 | Rp 1/4 – DN 6 * | 31 |
| 16 | 10 | (7) – 7.5 | (13) – 16.5 | (15) – 19.5 | (18) – 24.5 | (22) – 29.5 | 3.0 | 3.0 | Rp 1/4 – DN 6 * | 31 |
| 18 | 64 | [6.5] | (12) – 15.5 | (18.5) – 18.5 | (24.5) – 24.5 | (26) – 26.5 | 3.8 | 3.0 | G 3/4 – DN 10 | 31 |
| 18 | 40 | (7) – 8 | (13) – 18.5 | (22) – 22 | (26) – 28.5 | (26) – 32.5 | 3.8 | 3.0 | G 3/4 – DN 10 | 31 |
| 18 | 25 | (8) – 9 | (16) – 19.5 | (23) – 24.5 | (26) – 30.5 | (28) – 35.5 | 3.8 | 3.0 | G 3/4 – DN 10 | 31 |
| 18 | 10 | (8) – 10 | (16) – 21.5 | (23) – 26.5 | (29) – 33.5 | (28) – 37.5 | 3.8 | 3.0 | G 3/4 – DN 10 | 31 |
| 22 | 40 | (7) – 7.5 | (20) – 25.5 | (27) – 28.5 | (37) – 42.5 | (44) – 48 | 5.7 | 3.0 | G 3/4 – DN 10 | 31 |
| 22 | 25 | (7) – 8.5 | (20) – 25.5 | (25) – 33.5 | (35) – 43.5 | (40) – 51 | 5.7 | 3.0 | G 3/4 – DN 10 | 31 |
| 22 | 10 | (8) – 10 | (17) – 28.5 | (25) – 36.5 | (30) – 47 | (40) – 54 | 5.7 | 3.0 | G 3/4 – DN 10 | 31 |
| 26 | 25 | (20) – 22 | (35) – 49 | (40) – 59 | (65) – 72 | (50) – 83 | 7.9 | 3.0 | G 3/4 – DN 10 | 31 |
| 26 | 10 | (20) – 23.5 | (30) – 51 | (35) – 61 | (40) – 76 | (45) – 86 | 7.9 | 3.0 | G 3/4 – DN 10 | 31 |
Technical data for HYDRO HA2a 60 Hz
| Plunger Ø | Max. pressure | Max. pump capacity in l/h at strokes/min | Theor. stroke volume | Suction lift | Connection on suction/discharge side | Shipping weight | |||
|---|---|---|---|---|---|---|---|---|---|
| 72 | 149 | 180 | 224 | ||||||
| mm | bar | l/h | l/h | l/h | l/h | ml/stroke | m WC | G-DN | kg |
| * Double ball valve with female thread | |||||||||
| 16 | 100 | [3.5] | [7.5] | (10) – 10 | (12) – 13 | 3.0 | 3.0 | Rp 1/4 – DN 6 * | 31 |
| 16 | 64 | [4.5] | (10) – 11.5 | (12) – 15.5 | (14.5) – 19.5 | 3.0 | 3.0 | Rp 1/4 – DN 6 * | 31 |
| 16 | 40 | [6.5] | (12) – 15.5 | (14.5) – 18.5 | (16.5) – 23 | 3.0 | 3.0 | Rp 1/4 – DN 6 * | 31 |
| 16 | 25 | [7.5] | (14.5) – 17 | (16.5) – 21 | (20.5) – 27 | 3.0 | 3.0 | Rp 1/4 – DN 6 * | 31 |
| 16 | 10 | (8.5) – 9 | (15.5) – 19.5 | (18) – 23 | (21.5) – 29 | 3.0 | 3.0 | Rp 1/4 – DN 6 * | 31 |
| 18 | 64 | [7.5] | (14.5) – 18.5 | (22) – 22 | (29) – 29 | 3.8 | 3.0 | G 3/4 – DN 10 | 31 |
| 18 | 40 | (8.5) – 9.5 | (15.5) – 22 | (26) – 26 | (31) – 34 | 3.8 | 3.0 | G 3/4 – DN 10 | 31 |
| 18 | 25 | (9.5) – 10.5 | (19.5) – 23 | (27.5) – 29 | (31) – 36.5 | 3.8 | 3.0 | G 3/4 – DN 10 | 31 |
| 18 | 10 | (9.5) – 12 | (19.5) – 25.5 | (27.5) – 31.5 | (34.5) – 40 | 3.8 | 3.0 | G 3/4 – DN 10 | 31 |
| 22 | 40 | (8.5) – 9 | (24) – 30 | (32.5) – 34 | (44) – 50.5 | 5.7 | 3.0 | G 3/4 – DN 10 | 31 |
| 22 | 25 | (8.5) – 10 | (24) – 30 | (30) – 40 | (42) – 52 | 5.7 | 3.0 | G 3/4 – DN 10 | 31 |
| 22 | 10 | (9.5) – 12 | (20) – 34 | (36) – 43 | (44) – 50.5 | 5.7 | 3.0 | G 3/4 – DN 10 | 31 |
| 26 | 25 | (24) – 26 | (42) – 58 | (48) – 70.5 | (78) – 86 | 7.9 | 3.0 | G 3/4 – DN 10 | 31 |
| 26 | 10 | (24) – 28 | (36) – 60.5 | (42) – 73 | (48) – 91 | 7.9 | 3.0 | G 3/4 – DN 10 | 31 |
The permitted rated flow configuration is possible in the stated range when pumps are selected in accordance with API 675 (control range 1:10).
The litre capacity indicated using […] is the maximum litre capacity with an applicable control range of 1:5 and does not therefore satisfy API 675.
Example: with 16 mm piston, pressure 25 bar and stroke rate of 150 strokes/min gives (14) – 17.5, i.e. the control range of 1:10 is met for a rated flow of between 14 l/h and 17.5 l/h.
PVDF version max. 25 bar, PTFE + 25 % carbon; PTFE up to 16 bar
Wetted materials for HYDRO HA2a
| Identity code of material | Dosing head | Connection on suction/discharge side | Seals/ball seat | Balls |
|---|---|---|---|---|
| P1 | PVDF | PVDF | PTFE/PTFE + 25 % carbon | Ceramic |
| S1 | Stainless steel 1.4571/1.4404 | Stainless steel 1.4581 | PTFE/stainless steel 1.4404 | Ceramic |
| T1 | PTFE + 25% carbon | PVDF | PTFE/PTFE + 25 % carbon | Ceramic |
Motor data for HYDRO HA2a
| Identity code specification | Power supply | Remarks | |||
| S | 3-phase, IP 55* | 230 V/400 V | 50 Hz | 0.37 kW | |
| T | 3-phase, IP 55* | 230 V/400 V 265 V/460 V | 50 Hz 60 Hz | 0.37 kW | With PTC, speed control range 1:5 |
| R | 3-phase, IP 55* | 230 V/400 V | 50 Hz | 0.45 kW | With PTC, speed control range 1:20, with external fan 1-phase 230 V; 50/60 Hz |
| V | 1-phase, IP 55* | 230 V | 50 Hz | 0.37 kW | Variable speed stroke control motor with integrated frequency converter |
| L | 3-phase, II 2G Ex de IIC T4 Gb | 230 V/400 V | 50 Hz | 0.37 kW | With PTC, speed control range 1:5 |
| Q | 3-phase, II 2G Ex de IIC T4 | 265 V/460 V | 60 Hz | 0.37 kW | With PTC, speed control range 1:5 |
* 3-phase AC motor in accordance with IEC 60034-1Motor data sheets can be requested for more information. 265/460V – 60Hz versions, special motors or special motor flanges are available on request.
Information for use in areas at risk from explosion
Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EC in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label correspond to or are superior to the conditions prevalent in the intended application.
Hydraulic Diaphragm Metering Pump HYDRO HA3a
Technical data for HYDRO HA3a 50 Hz
| Plunger Ø | Max. pressure | Max. pump capacity in l/h at strokes/min | Theor. stroke volume | Suction lift | Connection on suction/discharge side | Shipping weight | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 60 | 125 | 150 | 187 | 214 | ||||||
| mm | bar | l/h | l/h | l/h | l/h | l/h | ml/stroke | m WC | G-DN | kg |
| * Double ball valve with female thread | ||||||||||
| 22 | 100 | [9.0] | [19.0] | [25.0] | [30.5] | [32.0] | 5.7 | 3.0 | Rp 3/8 – DN 8 * | 41 |
| 22 | 64 | [11.0] | [26.0] | [31.5] | [40.0] | [46.0] | 5.7 | 3.0 | Rp 3/8 – DN 8 * | 41 |
| 22 | 40 | [12.0] | [28.5] | [35.5] | [45.0] | [51.5] | 5.7 | 3.0 | Rp 3/8 – DN 8 * | 41 |
| 22 | 25 | [12.5] | [30.5] | [37.0] | [47.0] | [55.0] | 5.7 | 3.0 | Rp 3/8 – DN 8 * | 41 |
| 22 | 10 | [13.5] | [31.5] | [39.0] | [50.0] | [57.5] | 5.7 | 3.0 | Rp 3/8 – DN 8 * | 41 |
| 26 | 64 | (18) – 19 | (35) – 43.5 | (40) – 51.5 | (55) – 63 | (65) – 73 | 7.9 | 3.0 | G 3/4 – DN 10 | 41 |
| 26 | 40 | (18) – 21 | (37) – 45.5 | (40) – 55 | (50) – 71 | (70) – 81 | 7.9 | 3.0 | G 3/4 – DN 10 | 41 |
| 26 | 25 | (15) – 21 | (30) – 49.5 | (40) – 59 | (55) – 74 | (70) – 84 | 7.9 | 3.0 | G 3/4 – DN 10 | 41 |
| 26 | 10 | (15) – 22 | (30) – 49.5 | (35) – 61 | (50) – 77 | (80) – 87 | 7.9 | 3.0 | G 3/4 – DN 10 | 41 |
| 32 | 40 | (25) – 25.5 | (50) – 66 | (70) – 80 | (65) – 101.5 | (70) – 116.5 | 12.0 | 3.0 | G 1 – DN 15 | 41 |
| 32 | 25 | (25) – 26.5 | (50) – 69 | (65) – 83 | (65) – 105.5 | (70) – 122.5 | 12.0 | 3.0 | G 1 – DN 15 | 41 |
| 32 | 10 | (22) – 31.5 | (50) – 74 | (70) – 90 | (60) – 112.5 | (65) – 129 | 12.0 | 3.0 | G 1 – DN 15 | 41 |
| 38 | 25 | (25) – 50.5 | (70) – 110.5 | (80) – 126 | (150) – 166 | (180) – 187 | 17.0 | 3.0 | G 1 – DN 15 | 41 |
| 38 | 10 | (30) – 51.5 | (80) – 111.5 | (90) – 135 | (150) – 168 | (180) – 191 | 17.0 | 3.0 | G 1 – DN 15 | 41 |
Technical data for HYDRO HA3a 60 Hz
| Plunger Ø | Max. pressure | Max. pump capacity in l/h at strokes/min | Theor. stroke volume | Suction lift | Connection on suction/discharge side | Shipping weight | |||
|---|---|---|---|---|---|---|---|---|---|
| 72 | 149 | 180 | 224 | ||||||
| mm | bar | l/h | l/h | l/h | l/h | ml/stroke | m WC | G-DN | kg |
| * Double ball valve with female thread | |||||||||
| 22 | 100 | [10.0] | [22.0] | [29.5] | [36.5] | 5.7 | 3.0 | Rp 3/8 – DN 8 * | 41 |
| 22 | 64 | [13.0] | [30.5] | [38.0] | [47.5] | 5.7 | 3.0 | Rp 3/8 – DN 8 * | 41 |
| 22 | 40 | [14.5] | [34.0] | [42.5] | [53.5] | 5.7 | 3.0 | Rp 3/8 – DN 8 * | 41 |
| 22 | 25 | [15.0] | [36.5] | [44.5] | [56.0] | 5.7 | 3.0 | Rp 3/8 – DN 8 * | 41 |
| 22 | 10 | [16.0] | [37.5] | [47.0] | [59.5] | 5.7 | 3.0 | Rp 3/8 – DN 8 * | 41 |
| 26 | 64 | (21.5) – 22.5 | (42) – 51.5 | (48) – 61.5 | (66) – 75 | 7.9 | 3.0 | G 3/4 – DN 10 | 41 |
| 26 | 40 | (21.5) – 25 | (44) – 54 | (48) – 66 | (60) – 85 | 7.9 | 3.0 | G 3/4 – DN 10 | 41 |
| 26 | 25 | (18) – 25 | (36) – 59 | (48) – 70.5 | (66) – 88.5 | 7.9 | 3.0 | G 3/4 – DN 10 | 41 |
| 26 | 10 | (18) – 26 | (36) – 59 | (42) – 73 | (60) – 92 | 7.9 | 3.0 | G 3/4 – DN 10 | 41 |
| 32 | 40 | (30) – 30.5 | (60) – 78.5 | (84) – 96 | (78) – 121 | 12.0 | 3.0 | G 1 – DN 15 | 41 |
| 32 | 25 | (30) – 31.5 | (60) – 82 | (78) – 99.5 | (78) – 126 | 12.0 | 3.0 | G 1 – DN 15 | 41 |
| 32 | 10 | (26.5) – 37.5 | (60) – 88 | (84) – 108 | (72) – 134.5 | 12.0 | 3.0 | G 1 – DN 15 | 41 |
| 38 | 25 | (30) – 60.5 | (84) – 131 | (96) – 151 | (180) – 198 | 17.0 | 3.0 | G 1 – DN 15 | 41 |
| 38 | 10 | (36) – 61.5 | (96) – 132 | (108) – 162 | (180) – 201 | 17.0 | 3.0 | G 1 – DN 15 | 41 |
The permitted rated flow configuration is possible in the stated range when pumps are selected in accordance with API 675 (control range 1:10).
The litre capacity indicated using […] is the maximum litre capacity with an applicable control range of 1:5 and does not therefore satisfy API 675.
Example: a 26 mm piston, 25 bar pressure and stroke rate of 150 strokes/min results in (40) – 59, i.e. the control range of 1:10 is met for a rated flow of between 40 l/h and 59 l/h.
PVDF version max. 25 bar, PTFE + 25 % carbon; PTFE up to 16 bar
Wetted materials for HYDRO HA3a
| Identity code of material | Dosing head | Connection on suction/discharge side | Seals/ball seat | Balls |
|---|---|---|---|---|
| P1 | PVDF | PVDF | PTFE/PTFE + 25 % carbon | Ceramic |
| S1 | Stainless steel 1.4571/1.4404 | Stainless steel 1.4581 | PTFE/ZrO2 (DN 15/DN20 stainless steel 1.4404) | Ceramic |
| T1 | PTFE + 25% carbon | PVDF | PTFE/PTFE + 25 % carbon | Ceramic |
Motor data for HYDRO HA3a
| Identity code specification | Power supply | Remarks | |||
| S | 3-phase, IP 55* | 230 V/400 V | 50 Hz | 0.75 kW | |
| T | 3-phase, IP 55* | 230 V/400 V 265 V/460 V | 50 Hz 60 Hz | 0.75 kW | With PTC, speed control range 1:5 |
| R | 3-phase, IP 55* | 230 V/400 V | 50 Hz | 0.75 kW | With PTC, speed control range 1:20, with external fan 1-phase 230 V; 50/60 Hz |
| V | 1-phase, IP 55* | 230 V | 50 Hz | 0.75 kW | Variable speed stroke control motor with integrated frequency converter |
| L | 3-phase, II 2G Ex de IIC T4 | 230 V/400 V | 50 Hz | 0.75 kW | With PTC, speed control range 1:5 |
| Q | 3-phase, II 2G Ex de IIC T4 | 265 V/460 V | 60 Hz | 0.75 kW | With PTC, speed control range 1:5 |
* 3-phase AC motor in accordance with IEC 60034-1Motor data sheets can be requested for more information. 265/460V – 60Hz versions, special motors or special motor flanges are available on request.
Information for use in areas at risk from explosion
Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EC in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label correspond to or are superior to the conditions prevalent in the intended application.
Hydraulic Diaphragm Metering Pump HYDRO HA4a
Technical data for HYDRO HA4a 50 Hz
| Plunger Ø | Max. pressure | Max. pump capacity in l/h at strokes/min | Theor. stroke volume | Suction lift | Connection on suction/discharge side | Shipping weight | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 71 | 103 | 136 | 188 | 214 | ||||||
| mm | bar | l/h | l/h | l/h | l/h | l/h | ml/stroke | m WC | G-DN | kg |
| 40 | 40 | [79] | [118] | (150) – 154 | (200) – 211 | (220) – 242 | 25.1 | 3 | G 1 1/2 – DN 25 | 69 |
| 40 | 25 | [80] | [121] | (150) – 160 | (200) – 219 | (220) – 250 | 25.1 | 3 | G 1 1/2 – DN 25 | 69 |
| 40 | 16 | [82] | [125] | [162] | (200) – 225 | (220) – 254 | 25.1 | 3 | G 1 1/2 – DN 25 | 69 |
| 40 | 10 | [83] | (100) – 125 | (150) – 166 | (200) – 228 | (220) – 256 | 25.1 | 3 | G 1 1/2 – DN 25 | 69 |
| 40 | 7 | [84] | (100) – 127 | (150) – 167 | (200) – 230 | (220) – 261 | 25.1 | 3 | G 1 1/2 – DN 25 | 69 |
| 52 | 25 | [142] | (200) – 204 | (200) – 271 | (370) – 372 | [425] | 42.4 | 3 | G 1 1/2 – DN 25 | 69 |
| 52 | 16 | [143] | (190) – 205 | (200) – 274 | (370) – 376 | [425] | 42.4 | 3 | G 1 1/2 – DN 25 | 69 |
| 52 | 10 | [144] | (180) – 207 | (200) – 276 | (370) – 379 | [426] | 42.4 | 3 | G 1 1/2 – DN 25 | 69 |
| 52 | 7 | [145] | (180) – 209 | (200) – 277 | [380] | [426] | 42.4 | 3 | G 1 1/2 – DN 25 | 69 |
| 63 | 16 | (200) – 212 | (280) – 306 | (390) – 401 | [562] | [635] | 62.3 | 3 | G 1 1/2 – DN 25 | 76 |
| 63 | 10 | (210) – 215 | (280) – 311 | (380) – 407 | [562] | [638] | 62.3 | 3 | G 1 1/2 – DN 25 | 76 |
| 63 | 7 | (210) – 216 | (280) – 312 | (370) – 408 | [564] | [648] | 62.3 | 3 | G 1 1/2 – DN 25 | 76 |
| 80 | 10 | (280) – 350 | (420) – 509 | (580) – 657 | (890) – 914 | (1,050) – 1,056 | 100.4 | 3 | G 2 – DN 32 | 87 |
| 80 | 7 | (270) – 352 | (420) – 513 | (590) – 683 | (890) – 947 | (1,050) – 1,080 | 100.4 | 3 | G 2 – DN 32 | 87 |
| 94 | 7 | (350) – 493 | (500) – 710 | (820) – 936 | (1,000) – 1,258 | (1,400) – 1,440 | 138.7 | 3 | G 2 1/4 – DN 40 | 96 |
Technical data for HYDRO HA4a 60 Hz
| Plunger Ø | Max. pressure | Max. pump capacity in l/h at strokes/min | Theor. stroke volume | Suction lift | Connection on suction/discharge side | Shipping weight | |||
|---|---|---|---|---|---|---|---|---|---|
| 86 | 124 | 164 | 225 | ||||||
| mm | bar | l/h | l/h | l/h | l/h | ml/stroke | m WC | G-DN | kg |
| 40 | 40 | [95] | [142] | (180) – 200 | (240) – 252 | 25.1 | 3 | G 1 1/2 – DN 25 | 69 |
| 40 | 25 | [96] | [145] | (180) – 185 | (240) – 262 | 25.1 | 3 | G 1 1/2 – DN 25 | 69 |
| 40 | 16 | [99] | [150] | [195] | (240) – 269 | 25.1 | 3 | G 1 1/2 – DN 25 | 69 |
| 40 | 10 | [100] | (120) – 150 | (180) – 200 | (240) – 272 | 25.1 | 3 | G 1 1/2 – DN 25 | 69 |
| 40 | 7 | [101] | (120) – 152 | (180) – 201 | (240) – 275 | 25.1 | 3 | G 1 1/2 – DN 25 | 69 |
| 52 | 25 | [171] | (240) – 245 | (240) – 327 | (440) – 445 | 42.4 | 3 | G 1 1/2 – DN 25 | 69 |
| 52 | 16 | [172] | (230) – 246 | (240) – 330 | (450) – 450 | 42.4 | 3 | G 1 1/2 – DN 25 | 69 |
| 52 | 10 | [174] | (220) – 249 | (240) – 333 | (450) – 455 | 42.4 | 3 | G 1 1/2 – DN 25 | 69 |
| 52 | 7 | [176] | (220) – 251 | (240) – 334 | [454] | 42.4 | 3 | G 1 1/2 – DN 25 | 69 |
| 63 | 16 | (245) – 256 | (340) – 368 | (470) – 483 | [672] | 62.3 | 3 | G 1 1/2 – DN 25 | 76 |
| 63 | 10 | (255) – 260 | (340) – 374 | (460) – 490 | [672] | 62.3 | 3 | G 1 1/2 – DN 25 | 76 |
| 63 | 7 | (260) – 262 | (340) – 375 | (445) – 491 | [674] | 62.3 | 3 | G 1 1/2 – DN 25 | 76 |
| 80 | 10 | (340) – 424 | (505) – 613 | (700) – 792 | (1,065) – 1,094 | 100.4 | 3 | G 2 – DN 32 | 87 |
| 80 | 7 | (330) – 426 | (505) – 618 | (711) – 823 | (1,065) – 1,133 | 100.4 | 3 | G 2 – DN 32 | 87 |
| 94 | 7 | (430) – 597 | (600) – 854 | (990) – 1,128 | (1,200) – 1,506 | 138.7 | 3 | G 2 1/4 – DN 40 | 96 |
The permitted rated flow configuration is possible in the stated range when pumps are selected in accordance with API 675 (control range 1:10).
The litre capacity indicated using […] is the maximum litre capacity with an applicable control range of 1:5 and does not therefore satisfy API 675.
Example: with 52 mm piston, 10 bar pressure and stroke rate of 136 strokes/min results in (200) – 276, i.e. the control range of 1:10 is met for a rated flow of between 200 l/h and 276 l/h.
PVDF version max. 25 bar, PTFE + 25 % carbon; PTFE up to 10 bar
Wetted materials for HYDRO HA4a
| Identity code of material | Dosing head | Connection on suction/discharge side | Seals | Valve seats | Valve balls up to DN 25 | Valve plates/valve springs |
|---|---|---|---|---|---|---|
| P1 | PVDF | PVDF | PTFE | PTFE + 25% carbon | Glass | Ceramic/E-CTFE |
| S1 | Stainless steel 1.4404 | Stainless steel 1.4404 | PTFE | PTFE | Stainless steel 1.4401 | Stainless steel 1.4404/Hastelloy C |
| T1 | PTFE + 25% carbon | PVDF | PTFE | PTFE + 25% carbon | Glass | Ceramic/E-CTFE |
| V1 | PVC | PVDF | PTFE | PTFE | Glass | Ceramic/E-CTFE |
| Y1 | PPT | PVDF | PTFE | PTFE | Glass | Ceramic/E-CTFE |
Motor data for HYDRO HA4a
| Identity code specification | Power supply | Remarks | |||
| S | 3-phase, IP 55* | 230 V/400 V | 50 Hz | 1.1 kW | |
| T | 3-phase, IP 55* | 230 V/400 V 265 V/460 V | 50 Hz 60 Hz | 1.1 kW | With PTC, speed control range 1:5 |
| R | 3-phase, IP 55* | 230 V/400 V | 50 Hz | 1.5 kW | With PTC, speed control range 1:20, with external fan 1-phase 230 V; 50/60 Hz |
| V | 3-phase, IP 55* | 400 V | 50 Hz | 1.5 kW | Variable speed stroke control motor with integrated frequency converter |
| L | 3-phase, II 2G Ex de IIC T4 Gb | 230 V/400 V | 50 Hz | 1.1 kW | With PTC, speed control range 1:5 |
| Q | 3-phase, II 2G Ex de IIC T4 | 265 V/460 V | 60 Hz | 1.1 kW | With PTC, speed control range 1:5 |
* 3-phase AC motor in accordance with IEC 60034-1Motor data sheets can be requested for more information. 265/460V – 60Hz versions, special motors or special motor flanges are available on request.
Information for use in areas at risk from explosion
Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EC in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label correspond to or are superior to the conditions prevalent in the intended application.
